57
ICOP PRO HD HVR USER GUIDE
Advanced
ACC Alarm
• Select the
ACC alarm
option to enable ACC alarms.
An alarm is triggered due to shock detected by an
accelerometer
•
Alarm type:
Select either
Sensor
(When a Sensor
alarm is triggered, it is recorded in video as metadata
only)
, or
Event
(When an Event alarm is triggered, it
marks recorded video as ‘Alarm Video’ with metadata
included)
.
•
Trigger:
Tap the
Setup
button to configure the
parameters specific to this type of alarm
(see
Trigger Setup below)
•
Linkage:
Tap the
Setup
button to configure the
recording, monitor display and additional options
specific to this type of alarm
(see Linkage Setup below)
•
Calibrate:
Tap the
Calibrate
button while the recorder
is still to reset the accelerometer readings to 0.0.
Then tap the
Save
button.
Trigger Setup
Tap the
Setup
button under the Trigger field to display
the setup screen to configure the parameters specific to
the ACC Alarm.
• Tap in each of the
X, Y,
and
Z
fields and enter a
threshold
(between 0 and 9.9 Gs)
for each direction
which when exceeded triggers the alarm
•
Effective Time:
Enter the time
(between 0 and
10 seconds)
that the alarm is effective
(select the
Question Mark icon for more details)
Then tap the
OK
button.
Then tap the
Save
button.
