13
ICOP PRO HD HVR USER GUIDE
1 - Beep/Vibration Switch
Use the Beep/Vibration Switch
to toggle notifications.
•
BEEP:
Audible beeps sound
•
VIB:
Unit is silent, vibrates for notifications
•
OFF:
Disables all sound and vibration notifications,
observe status LEDs for unit status
2 - Power Switch
Use the Power Switch to turn the
microphone on and off.
3 - Record Button
Use the Record button to start and stop
video recordings:
1.
Remove the microphone from the cradle and
ensure the power switch is in the ON position.
2.
Press the Record button once to begin recording.
The In-USE status LED displays green.
3.
Press the Record button once more to conclude
recording. The In-USE status LED turns off.
4.
Replace the microphone in the cradle when not
in use or when the battery is low.
4 - Status LEDs
The In-USE and Low Batt LEDs display the
microphone’s current status:
In-USE (green):
•
Solid:
Video and audio is recording
•
Flashing:
Microphone is close to going out of range
of the receiver
Low Batt (red):
•
Solid:
Battery is low, return the microphone to the
cradle to recharge
•
Flashing:
Voice recording is muted
5 - Mute Button
Press the Mute button once during a
recording to mute voice recording
(Low Batt status LED
flashes red)
. Press the Mute button once more to un-mute
voice recording.
6 - Ext. Microphone Port
Attach an external lapel
microphone using a 2.5 mm connector.
Components