-Auto Stop/Talk broadcast duration: Not Applicable at this time.
-Over Speed Value: Here is where you set the parameter of your desired speeding
threshold. If you input 80 into the field, when that vehicle hits or exceeds 80mph (if your
unit of speed is MPH) you will be notified if you have any alerts setup as this is an
Event. Otherwise you will see a Red light appear on that particular unit. (Indicated in
Device list on page 2).
-Show Route of All Day: Not Applicable at this time
-Web Port: Not Applicable
-Idle Duration: Here is where you set the parameter of your desired Idling threshold. You
will notice that the duration is in seconds. If you input 600 then you will either receive a
notification if setup or be indicated from your device list that a vehicle has been sitting
idle for more than 10 minutes.
-Display in Proportion: When live streaming a camera the view will be in proportion to
the camera, not fit the live view window. (The window will be shrunk down to fit the
center of the live view window).
-Full Screen Type: When you select select full screen or max window from the software/
window options (Refer to Section B on page 4.) you will have a choice of full screen.
Full screen from main window, the computer you are using or a second monitor if you
have one installed.
-Min percent of data need downloaded when playback: This directly relates to the remote
playback/video playback feature. This is not applicable to you if you have the UCIT 2
Camera System. At a standard this is set to 80 and this works best. Basically what this
means is that when you start the download on a snip of video from a vehicle in Video
playback, it will have to be 80 percent downloaded before you will see video. By setting
this to 80% we are allowing the video to get the majority of the way downloaded so we
can view without any “buffering” interruption.
Page 4: NOT APPLICABLE
-This page shows the Storage Server Settings. There is no need to manipulate these
settings as it could cause your software to not work properly.
14