Safety 1st onBoard 22 Instruction Manual Download Page 3

3

Thank you for choosing this car seat, referred to throughout 
this manual as an infant restraint. Dorel Juvenile Group, 
(DJG) is committed to creating convenient, comfortable, and 
dependable products for children.

No one can predict if use of an infant restraint will prevent 
injury or death in a particular crash. However, combined with 
careful driving, proper use of an infant restraint can lower an 
infant’s risk of injury or death in most crashes.

Your infant’s safety is worth the time it will take to read, 
understand and follow the instructions and warnings. 

After reading if you still have questions or concerns with 
the infant restraint please contact our Consumer Relations 
Department.

On the back of the shell there is an expiry date for use of 
this infant restraint.  Do not use this seat after the expiry 
date.

A-1 

Thank You...

A. Before You Begin

4

Dorel Juvenile Group, Inc.

Website:  

www.djgusa.com

Email:  

[email protected]

Fax:  

1-800-207-8182

Mailing Address: 

Dorel Juvenile Group, Inc.

 

Consumer Relations Department

 

P.O. Box 2609

 

Columbus, IN 47202-2609  

Telephone: 1-800-544-1108

 

8 A.M. to 6 P.M. EST M-TH

 

8 A.M. to 4:30 P.M. EST FRI

A-2 

Dorel Juvenile Group Consumer

         Relations Contact Information

Although infant restraints are tested, evaluated and certified 
by the manufacturer and tested by Transport Canada, it 
is possible that a safety-related problem may be found. If 
there is ever a safety issue with your infant restraint, we use 
registration information to reach owners.  

If you don’t have the card or if your 
address changes, you will find the 
model number and manufactured date 
on the label located on side of shell. 
There are three additional ways to 
register your information:

 A-3 

Registration and Safety Notices

For information on safety-related problems, you can also call 
Transport Canada’s Road Safety Dept. at: 1-800-333-0371.

Online:

 www.djgusa.com/registration/carseat/can

Telephone:

 1-800-544-1108

Mail:

 

Send your name, address and your infant

 

restraint’s model number and

 

manufactured date to:

 

Dorel Juvenile Canada

 

873 Hodge, St-Laurent, QC  H4N 2B1

 

Attn: Consumer Relations

Please do not send in your registration card if you have 
registered your infant restraint online.

4359-4117C

Consumer:

  Just fill in your name, address and email.  Please print.

Client: 

Simplement inscrire votre nom, adresse et courriel. S.V.P. imprimez.

Tear Off and Mail This Part or Register Online

Your Name/

Votre nom:

Your Street Address/

Votre adresse:

City/

Ville:

Province

Postal Code/

Code Postal:

Email Address (optional)/

Courriel (optionnel):

Détachez et postez cette partie ou enregistrez en ligne

Model 
Number

Manufacture 

Date

4358-6693 Light N Comfy Elite, OnBoard 22 ENG.indd   5-6

4358-6693 Light N Comfy Elite, OnBoard 22 ENG.indd   5-6

11/5/14   10:47 AM

11/5/14   10:47 AM

Summary of Contents for onBoard 22






























Reviews: