background image

54

53

Check Level to Ground 
Line

Make sure the level to 
ground line on the side of 
the infant restraint is level 
with the ground.

5.

 

Check Vehicle Belt 
Tightness 

Grasp the base or shell 
at the belt path

 with one 

hand. Push and pull the 
base or shell from side to 
side, forward and back. 
The base or shell should 

not move more than 2.5 
cm (1 in.) and the vehicle 
belt should not loosen.

NOTE:

 If it moves more 

than 2.5 cm (1 in.) or if 
the vehicle belt loosens, 
try reinstalling the infant 
restraint or try another 
seating location. If you still 

have questions after installing the locking clip please contact 
our Consumer Relations department.

Remove the locking clip when the vehicle seat belt is not 
being used with an infant restraint.

4.

 

For replacement parts, complete this form below. We must have 
your model number and manufacture date codes on the form to 
ensure proper replacement parts. They can be found on the stickers 
on the side of the infant restraint shell. Payment in U.S. dollars must 
accompany your order. Choose parts needed from the list supplied. 

Mail form and payment to:

Dorel Juvenile Group. Inc.
Consumer Relations Department

P.O. Box 2609
Columbus, IN 47202-2609

Fax to: 1-800-207-8182

Website: www.djgusa.com

Please make money order payable to Dorel Juvenile Group, Inc. 
See next page for Visa or MasterCard payment. We do not accept 
personal checks or Discover Card. For orders outside of Canada and 
the U.S. we accept Visa or MasterCard only.

 Replacement Parts Order Form

Ship to (please print)_________________________________

Name____________________________________________

Address __________________________________________

City_____________________________________________

Province _________________________________________

Postal code_______________  Country _________________

Telephone (area code)________________________________

E-mail address_____________________________________

We

 MUST

 have this information to process your order:

Model Number (5 digits & 4 letters):
_______________________________________________
Manufacture Date (yyyy/mm/dd):
_______________________________________________

4358-6693 Light N Comfy Elite, OnBoard 22 ENG.indd   55-56

4358-6693 Light N Comfy Elite, OnBoard 22 ENG.indd   55-56

11/5/14   10:47 AM

11/5/14   10:47 AM

Summary of Contents for onBoard 22






























Reviews: