F. Installing Forward Facing
46
47
Tighten Top Anchorage
Strap (Tether)
Push firmly on the back
of the child restraint and
tighten top anchorage strap
(tether).
5.
Check Belt Tightness
Grasp the child restraint
at the belt path
with one
hand. Push and pull the
child restraint from side to
side, forward and back. The
child restraint should not
move more than 1 in. (2.5
cm).
NOTE:
If it moves more
than 1 in. (2.5 cm) try
reinstalling the child
restraint or try another
seating location.
Secure your child in the
child restraint.
6.
To Remove LATCH Belt
From Vehicle Anchor
Remove child from child
restraint.
Press down firmly on child
restraint and press the red
release button on each
connector.
F-5
Installing Forward Facing
With Vehicle Belts
Child Restraint Must
Be Upright
Rotate recline stand
out and push upward
to lock in position.
Store LATCH
2.
1.
continued on next page.
NOTE:
Review section D-4 and your vehicle owner’s manual
to determine what kind of vehicle belts you have.
Do not use the LATCH system along with
the vehicle belt. Store LATCH belts when
using the vehicle belts.
Check the vehicle belt before each use. Use
only if the belt is tightened properly and
securely.
Failure to follow these warnings can result
in serious injury or death.