C. Basic Use
26
27
Thread Harness Strap
OVER Metal Bar
c.
b.
a.
(3)
Thread left harness
strap end through the
back
of the left buckle tongue.
Repeat for right harness
strap end.
(4)
Thread the chest clip
from front to back as
shown.
(5)
Push harness strap
ends through upper
harness slots.
DO NOT twist harness
straps.
3
4
5
Attach Harness Strap
to Splitter Plate
From the bottom of the
child restraint, fit the
harness strap loops onto
the splitter plate.
The sewn ends of the
harness strap loops MUST face towards you. DO NOT
twist harness straps or harness tightening strap and
make sure the harness strap loops are COMPLETELY
ON the splitter plate.
C-9
Accessories
Install Cup Holder
(on select models)
Pull pad off corner. Hook
bottom of cup holder to edge
of shell.
Rotate cup holder up until it
snaps into the hole on the
shell.
Replace pad.
Take both ends of the
harness strap and make
them even in length.
The sewn ends of the
harness strap loops MUST
face each other as shown.
4
3.
Failure to place the harness
tightening strap between
shell and the harness
straps as shown can result
in serious injury or death.
Harness MUST be threaded
over the metal bar.
Harness system must be reattached
correctly.
Failure to follow these warnings can result
in serious injury or death.