44
45
2.
continued on next page.
Place Child Restraint
Flush Against Vehicle
Seat Back Forward
Facing
3.
Connect LATCH
to Vehicle LATCH
Anchor
NOTE:
The LATCH’s
red release button
MUST
face away from
child restraint and the
arrows on connectors
MUST
face up.
Fasten one LATCH
belt connector to the
anchor in the vehicle
seat located in the
vehicle seat bight.
Repeat for other side
of child restraint.
Child Restraint Must Be
Upright
Rotate recline stand out
and push upward to lock in
position.
F-4
Installing Forward Facing
With LATCH
NOTE:
Review your vehicle owner’s manual for LATCH belt use.
1.
Do not use the LATCH system along with the
vehicle belt.
Check LATCH belt before each use. Use only
if the belt can be tightened properly and
securely.
Failure to follow these warnings can result in
serious injury or death.
Tighten LATCH Belt
Push down firmly while
pulling up on the free
end of the LATCH belt
to tighten.
4.
It may be easier to
tighten the LATCH belt
through the belt path
opening as shown.
F. Installing Forward Facing
Installation Tip:
Loosely attach the top
anchorage hook (tether)
before connecting the
LATCH belt. Consult
vehicle owner’s manual
for specific location.
