BATTERY OPERATIONS
7
STORAGE OF UNIT AND BATTERIES
Store the Electronic PinBrazing unit in a place where it is protected from the elements,
abrasive dust, and damage.
The batteries must be stored in a clean and dry location, and preferably in a
temperature-controlled environment.
Units are shipped with the batteries not fully charged. Please charge the unit before use.
The batteries must be given a freshening charge once every year if the unit is not in use.
Failure to observe these conditions may result in greatly reduced capacity and service life.
Only charge the unit indoors at room temperature.
Failure to follow the instructions in the battery charger operation manual can result in
battery explosion and serious bodily injury. To reduce the risk of battery explosion, read and
understand the safety and operation instructions in the battery charger operation manual, the
instructions published by the battery manufacturer, and the instructions in this manual before
attempting to charge the batteries.
Use only battery charger specially made for pin brazing units (36V DC) approved by Safetrack.
WARNING
NOTICE
Summary of Contents for ECONECT PinBrazing
Page 22: ...22 NOTEPAD ...
