3
Model ASx-900|
Owner’s Manual
| Version no: 1
1.0 Introduction
1.1
Scope of this manual
This manual covers the operation of the Lift Table after it has been installed and commissioned.
Do not attempt to install or commission a Lift Table unless you have been trained and authorised by
Safetech.
1.2
Disclaimer
Although every effort is made to ensure accuracy, currency and completeness of the information
contained in this manual, Safetech does not guarantee, warrant, represent or undertake that the
information is correct, accurate or current.
Safetech is not liable for any loss, claim, cost or expense of any kind arising in any way whatsoever
from the information contained in this manual.
1.3
Copyright © 2016
Safetech of 39-45 Della Torre Road, Moe Victoria, 3825, all rights reserved.
No part of this document may be reproduced or utilised in any means, by any means, electronic or
mechanical, including photocopying, recordings or any information storage or retrieval system,
without the express permission from Safetech.
1.4
Owner’s Responsibility
To ensure both your safety and the safety of others, and the continued effective operation of your
Safetech Lift Table, your responsibilities are as follows:
•
Before operating the Lift Table, please read and ensure you understand both the safety
instructions and the operating instructions.
•
If you do not fully understand these instructions, contact either Safetech or an authorised
Safetech agent for clarification before operating your Lift Table.
•
The Owner must review the Risk Assessment in this manual.
•
Please Note: That in the Risk Assessment a number of items have been flagged as Completed?
= No. The Owner must include these hazards in their own operational risk assessment and
ensure that action is taken to address the hazard.
•
The owner is responsible to ensure all operators have been adequately trained on the safe
operation of the Lift Table.
•
The owner is responsible to ensure that a risk assessment on the Lift Table in their operating
environment is done.
