Commands
Chapter 6. CLI Command Reference
78
netman
Parameters and
Attributes
none
– specifies that the HA4000 gateways are
connected back-to-back, with no routers between
them. The HA4000 copies the MAC address from the
incoming packet.
arp
– specifies that the destination is on the same
subnet as the HA4000 gateway’s local port (if the local
port is connected to a Layer 2 switch). The HA4000
uses Address Resolution Protocol (ARP) to derive the
MAC address of the destination device.
gateway
– specifies that the HA4000 gateway’s local
port is connected to a router. The gateway IP address
identifies a device to send packets to for routing to
their destination.
ipAddress
– specifies the IP address of the default
gateway.
Reboot Required
No.
Usage Guidelines
See “Layer 2 MAC Address Resolution” on page 27.
Syntax
netman {password <
password
> | login {enable |
disable <
value
>}}
Shortcut
None
User Type
Administrator
Hierarchy Level
Configuration
Description
Configures the Network Manager logon and password.
Parameters and
Attributes
password
– assigns the network manager password.
password
– specifies the network manager password.
A password is a character string with at least one
alphanumeric character. Passwords are case-sensitive;
they are suppressed from displaying when typed. A
password can include these special characters: ! @ # $
% ^ * ( ) _ + = - [ ] { } \ | ; : < >
Note:
Although these characters are valid for use in
passwords, they may cause problems with third-party
scripting tools.
login
– enables or disables the network manager
logon.
value
– specifies the number, from 0 through 99, of
unsuccessful logon attempts allowed. A value of zero
allows unlimited unsuccessful logon attempts.
Reboot Required
No.
Usage Guidelines
See “Set Passwords” on page 35.
