![background image](http://html1.mh-extra.com/html/safeline/sl6/sl6_manual_3321571021.webp)
21
SafeLine SL6+ v.3.9.0 EN
Remote
configuration
with telephone/
calling the SL6:
step 1
In order to remotely configure or call a unit in the SL6+ system, the
unit must first be put into configuration mode via voice communi-
cation mode.
Follow the steps below to enter voice communication mode.
1.
Dial the phone number of the unit.
2.
If there is only one unit in the system, proceed to step 5. If there
are multiple units connected in parallel, proceed to step 3.
3.
After 2 rings the first SL6+ unit answers with a short beep.
4.
Choose which unit to configure by pressing the unit's number.
NOTE:
If there are other SafeLine telephones connected in
serial you may have to press the unit number several times
before the 3 long tones are heard.
5.
When 3 long tones are heard, the selected unit is reached and
voice communication mode is established.
NOTE:
the telephone will now beep every 5 seconds to notify
the passengers of the ongoing call (anti eavesdropping).
Multiple SL6+ connected
to phone number?
Dial the phone
number of the SL6+
Voice communication
mode entered.
Press unit number [1-9].
1 short beep,
first SL6+ answers.
3 long tones,
SL6+ answers.