WLAN SIP IP Phone
SWSIP-1000 User Manual
www.safecom.cn
41
Copyright © 2006 Safecom Technologies Limited
LABEL
DESCRIPTION
Get IP
Address
Network
Mode
Click
STATIC
to manually enter a fixed IP address.
Click
DHCP
to have the SWSIP-1000 automatically obtain network settings from a Dynamic
Host Configuration Protocol server. These settings are configurable.
Click
PPPoE
if your ISP uses Point-to-Point Protocol over Ethernet.
Network IP
This is the IP address your SWSIP-1000 uses to connect to the wireless LAN. Type the
address given to you by your network administrator.
Network
Subnet
Mask
The subnet mask specifies the network number portion of an IP address. Type the
subnet mask given to you by your network administrator.
Default
Gateway
Type the gateway IP address of the device to which you want to connect your
SWSIP-1000.
MAC
Address
Every Ethernet device has a unique MAC (Media Access Control) address. The
MAC address is assigned at the factory and consists of six pairs of hexadecimal
characters, for example, 00:A0:C5:00:00:02.
This field is read only and cannot be configured.
DNS Server
IP
Type the DNS’ IP address for translating readable domain names into valid
computer IP addresses.
Second DNS
Server IP
Type a backup DNS IP address for the SWSIP-1000 to use in the event that the
SWSIP-1000 cannot connect to the preferred DNS.
APPLY
Click
APPLY
to save your changes without restarting the SWSIP-1000. Your wireless
LAN, Internet and SIP settings changes do not take affect until you use
RESTART
(in the navigation panel).
CANCEL
Click
CANCEL
to begin configuring this screen afresh.
