WLAN SIP IP Phone
SWSIP-1000 User Manual
www.safecom.cn
13
Copyright © 2006 Safecom Technologies Limited
3.4.1.2 DHCP
This section provides instructions for performing the DHCP settings.
The Dynamic Host Configuration Protocol (DHCP) client provides a mechanism
for allocating IP address dynamically so that addresses can be reused when hosts
no longer need them.
3.4.1.3 PPPoE
The Point-to-Point Protocol over Ethernet (PPPoE) provides more than just IP
address assignment, which is the primary purpose of DHCP (assigning a unique
and available IP address based upon a unique network adapter address). PPPoE
also allows for the movement of TCP/IP traffic between two known points. It
requires a username and password to log on.
12:00
SWSIP-1000
Not Registered
Menu Names
Menu
Select
Select
Back
4. Net Setting
5. SIP Setting
6. Settings
Select Back
Back
[2]DHCP
[3]PPPoE
[1]Fixed IP
Select Back
[2]DHCP
[3]PPPoE
[1]Fixed IP
Select Back
OK
Select
1. Network Mode
2. IP Address
3. Subnet Mask
Select Back
