Phoenix G2 IDU User Manual
WEB GUI
SAF Tehnika JSC
69
Figure 3.21
“
Status
Trends
Actual” page
Status
Trends
Historical
The graph in this section displays the selected values in dependence on time. If the connection
with remote side is established, the values from the remote unit are will be displayed.
For depiction it is possible to choose from following options:
TxPower
– depicts the transmitter signal output level
RxL/MSE
– received signal level/quality of the received signal
Temperature
– displays the temperature of modem and radio
ETH_Count
– displays the transmission capacity for the transmission and admission
on the selected ports of the IDU
Sync/Modul
– value MLOCK = 1 displays modem synchronization, value MLOCK = 0
shows that there was no synchronization. If ACM is active, the most appropriate
modulation for signal transmission or admission is found. Individual modulations are
indicated by their amount of states.
It is possible to zoom the graph by means of mouse selection of the interested range; and
reset the zoom by pressing the
button.
The resolution of the displayed data will be lower for older records and higher for the newest.
This time segmentation is 10 minutes, 1 minute and 1 second.
