12
XL-FW535 Rev G · 2014-08-11 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF, and
logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Rebuild Procedures
NEVER-SEEZ
®
GREASE
LOCK PIN
LOCK
ADJUSTING PIN
RETAINING RING
RETAINING RING
HOOK PIN
HOOK PIN
GREASE
Figure 11
4. Install the hook pin into the hook’s small hole with the
rounded head toward the top plate.
5. Place the release cam over the hook pin
(Figure 9)
.
6. Install the 3/4" diameter retaining ring. Ensure the
retaining ring is fully seated in the hook pin groove
(Figure 10)
.
7. Lubricate the adjusting pin, the lock pin, and the lock
(Figure 11)
.
Figure 9
Figure 10
HOOK PIN
HOOK
RELEASE CAM
ROUNDED HEAD TOWARD TOP PLATE