Saf-Fro DIGISTEEL 250C, Operator'S Manual

Page: 37 / 868

English 33 English
Green Mode – is a power management
feature that enables welding equipment to
switch to low power state and reduce power
consumption while is not using.
To adjust this functions:

Access to “Configuration” Menu.

Use right knob [44] to highlight the „Green Mode“ icon.
Figure 66

Press right knob [44]. The “Green Mode” menu is
shown on the display
Figure 67
Table 17 Display Configuration Settings
Symbol Description
Standby (default :Off)
Shutdown (default :Off)
Standby – this option allows you to reduce
energy consumption to the level below 30W
when the welding equipment is unused.
To set the time when Standby option will be
turn on:

Press right knob [44] to enter in to Standby menu

By the right knob [44] set require time from 10-300min
range or Off this function.

Press right knob [44] to confirm.
Figure 68
When machine is under Standby mode any action on
user interface or trigger activates normal work of welding
machine
Shutdown – this option allows you to reduce
energy consumption to the level below 10W
when the welding equipment is unused.
To set the time when Shutdown option will be
turn on:

Press right knob [44] to enter in to Shutdown menu

By the right knob [44] set require time from 10-300min
range or Off this function.

Press right knob [44] to confirm.
Figure 69

Operating system inform you 15s before activate
Shutdown Mode by time counter.
Figure 70