SAelen TS GS/PUMA 35D, Operating Manual

Page: 18 / 64

The rotor is the main component of the machine and has the task to chip
the material coming from the infeed roller
The unit consists of one infeed hopper (1)
. An anti-blocking system
disconnects the infeed if the speed of the rotor falls
below the minimum speed (chipping unit jammed)
and automatically connects again after the speed of
the rotor is sufficient for correct chipping work
The infeed can turn into both directions (forward and
backwards) when using the yellow and the black but-
ton
(4) located on the left side of the infeed hopper
The speed of rotation can be matched to the diameter
of the material to be chipped using the regulating
screw
(4) on the left side of the rear hood
The frame is used for allocating the different components of the chipper
General description and functions