Saeco Phedra Evo D.A. 5P2015, Operation And Maintenance, Page: 50 / 92

English
8
50
DISPLAY Description
1.8.2.1.
Extra time (in tenths of seconds) for steam dispensing applied in case the circuit is cold, since
a reduced quantity of milk is dispensed in this case.
Extra Time
00
1.8.2.2.
It determines the delay time (in minutes) after which the preheating of the Cappuccinatore
is enabled.
Warm-Up T-Out
00
1.9. By setting the “W” value in the product list, hot water will be dispensed.
This menu allows choosing the solenoid valve to be used for dispensing
If the “hot water solenoid valve” kit is installed, set the value to 0 (zero) or select the
solenoid valve operating on the desired circuit among the available ones.
EV Water Assign
…
1.10. Enables setting of the hour, minute, day of the week, day of the month, month and year.
Clock
…
1.10.1.
Time
08:00
1.10.2.
Date
1.10.3. Enables date and time display in US format - enables temperature display in °F
Date/time format
1.11. Allows setting the vending machine’s automatic on and off time ranges over the course of a
week.
On/Off time
…
1.11.1.
On 1
00:00
1.11.2.
Off 1
00:00
1.11.3.
On 2
00:00
1.11.4.
Off 2
00:00
1.12.
It allows displaying for a few seconds the selection counters (total and since last reset)
during the machine start-up phase.
Audit Msg. Enable