Saeco Phedra Evo D.A. 5P2015, Operation And Maintenance, Page: 33 / 92

English
5
33
The new hose-sets
supplied with the appliance
are to be used and that old
hose-sets should not be
reused.
5.6 Connection to the Electric
Network
The Maintenance Technician,
who is responsible for the
installation of the vending
machine, must ensure that:
• the power supply system complies with the safety instructions in force;
• the voltage corresponds to that indicated on the appliance data plate.
In case of doubt, do not
proceed with the installation
and
ask qualified and
authorised personnel to
accurately check the system.
The vending machine is equipped with a power cord which must be
plugged into the appropriate socket on the vending machine back panel.
Do not use adapters or multi-sockets.
Make sure that the power
cord plug is easily reachable
after installation.
5.7 Coffee Grounds Discharge
Setting
The appliance is setup for direct discharge of the coffee grounds
into the bag in the dedicated cabinet or into another container
located below the appliance (ex. bar counter).
For this setting, the vending machine base must be cut along the
indicated marks.
The appliance has an alarm
signal to indicate when to
empty the coffee grounds
in the standard version. For
this setting it is necessary
to exclude this counter
using the menu.