• 11 •
English
9 CLEANING
Maintenance and cleaning may only be carried out
when the machine has cooled down and has been
disconnected from the power supply.
• Do not immerse the machine in water nor place any of its
parts in a dishwasher.
• Do not use spirit, solvents and/or aggressive chemical
agents.
• We recommend cleaning the water tank and
fi
lling it up
with fresh water daily.
•
(Fig.21-22)
- Every day, after heating the milk, remove
the external part of the Pannarello and wash it with fresh
drinking water.
•
(Fig.23)
- Clean the steam spout weekly. In order to do
this, please:
- Remove the external part of the Pannarello (for standard
cleaning).
- Loosen the ring nut (without removing it).
- Remove the upper part of the Pannarello from the steam
spout.
- Wash the upper part of the Pannarello with fresh drinking
water.
- Wash the steam spout with a wet cloth and remove any
milk residue.
- Replace the upper part of the steam spout (make sure
it is completely inserted).
- Tighten the previously loosened ring nut.
Reassemble the external part of the Pannarello.
•
(Fig.24)
- Empty and clean the drip tray daily
• Use a damp and soft cloth to clean the appliance.
•
(Fig.17) -
Perform the following operations to clean the
pressurized
fi
lter holder:
- Remove the
fi
lter, wash it thoroughly with hot water.
- Remove the pin, wash it thoroughly with hot water.
- Wash the internal part of the pressurized
fi
lter holder.
• Do not dry the machine and/or its components in a
microwave and/or in a conventional oven.
Note: do not wash the pressurized porta
fi
lter in
the dishwasher.
10 DESCALING
The formation of limescale inside the appliance is
inevitable. It is necessary to descale the machine every
1-2 months of use and/or when you notice a reduction in
the water delivery.
Please use Saeco descaling solution in your
machine (Fig.B). It has been specifically
developed to preserve performance and functionality
throughout the lifetime of the machine and to ensure,
with regular use, a high quality delivered product.
Warning! Do not use vinegar as a descaling
solution.
•
(Fig.1)
- Remove and empty the water tank.
•
(Fig.2)
- Mix the descaling solution with water as speci
fi
ed
on the descaling solution box and
fi
ll the water tank. Fit
the tank into the machine.
•
(Fig.3)
- Turn on the machine by pressing the ON/OFF
button (2).
•
(Fig.4)
- Place a container under the steam spout.
•
(Fig.5 - 6)
To remove at intervals (one cup at a time) all
the descaling solution: open the knob (4) and switch the
selection knob (17) to the "
" position.
To stop brewing, switch the selection knob (17) to the
" " position and close the knob (4).
•
(Fig.3)
- During each interval disconnect the machine
by pressing the ON/OFF button (2) in order to let the
descaling solution take effect for about 10-15 minutes.
Empty the container.
•
(Fig.1 - 2)
- When the descaling solution is
fi
nished,
remove the water tank, rinse it and
fi
ll it with fresh drinking
water.
•
(Fig.1)
- Reinsert the tank into the machine.
•
(Fig.4)
- Place a container under the steam spout.
•
(Fig.5 - 6)
- Open the knob (4) and set the selection knob
(17) to the "
" position to empty 2/3 of the water. To
stop brewing switch the selection knob (17) to the " "
position and close the knob (4).
• Let the machine warm up and empty the water tank as
described above.
Saeco descaling solution should be disposed of
according to the manufacturer instructions and/
or the regulations in the country of use.
11 CAPPUCCINATORE (OPTIONAL)
Not all machine models are provided with
cappuccinatore. The cappuccinatore allows you to easily
and quickly prepare delicious cappuccinos.
Follow these simple instructions to install it.
1
(Fig.29)
- Loosen the ring nut on the upper part of the
cappuccinatore.
2 Insert the cappuccinatore completely into the steam
spout.
3
(Fig.30)
- Tighten the ring nut.
To use the cappuccinatore, prepare the machine as
described in the related sections.
Before using the accessories, we recommend washing
them with water
(Fig.31-32)
, immerse the suction pipe
in a fresh water container and eject a small quantity of
steam (please refer to the related instructions). In this
way, the accessories will be perfectly clean before use.
To clean the cappuccinatore, suck up clean water
to clean the suction pipe.
While the machine is getting ready, prepare a special
container with milk or use the milk container. Place it
beside the machine.
Summary of Contents for NINA
