• 49 •
Machine Installation - Service Provider Manual
2
Lubricate also the shaft.
3
Insert the Brew Group back into its seat until it locks into
place, WITHOUT pressing the "PRESS" button.
4
Insert the coff ee grounds drawer and the drip tray. Close the
service door.
10.7 Descaling
Limescale is a natural part of the water used for machine opera-
tion. It needs to be removed regularly as it may clog the water and
coff ee circuit of your appliance.
The advanced electronics shows on the machine display (in clear
symbols) when descaling is needed. Just follow the steps de-
scribed below.
This operation needs to be carried out before the appliance stops
working properly, as in this case the repair is not covered by the
warranty.
Use the Saeco descaling product only. Its formula has been de-
signed to ensure better machine performance and operation for
its whole operating life. If correctly used, it also avoids alterations
in the brewed product.
The descaling solution and the complete "Maintenance Kit" may
be purchased at your local dealer or at authorised service centres.
Warning! Never drink the descaling solution or
any products dispensed until the cycle has been
carried out to the end. Never use vinegar as a descaling
solution.
1
Turn on the machine by pressing the ON/OFF button. Wait for
the machine to fi nish its rinse and warm-up process.
Warning! Remove the "Intenza" fi lter before add-
ing the descaling solution.
2
Enter the programming mode as described in section 9.1.
3
Press the "
" button (24) and select the "MACHINE
MENU" option; press the "
" button (18) to enter the menu.
MACHINE MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
FACTORY SETTINGS
4
Press the "
" button (24) and select the "MAINTENANCE"
option; press the "
" button (18) to enter the menu.
Summary of Contents for auLika
