• 33 •
Machine Installation - Service Provider Manual
9
The machine starts the milk dispensing phase. The
"STOP
MILK"
message is displayed.
MEMO
ESC
STOP MILK
At this stage, press the "
" button (23) when the desired
amount of milk in the cup is reached.
10
Immediately after that, the machine starts the coff ee brew-
ing phase. The
"STOP COFFEE"
message is displayed.
MEMO
ESC
STOP COFFEE
At this stage, press the "
" button (23) when the desired
amount of coff ee in the cup is reached.
Now the "
" button (20) has been programmed. Whenever
the button is pressed and released, the machine will brew the
same amount that has just been set.
Note: The length of all the products, except
“AMERICAN COFFEE” and “STEAM”, can be pro-
grammed with this procedure.
When the programming procedure is completed, enter the pro-
gramming mode and reset the
"SELF LEARNING"
parameter to
"OFF"
, in order to prevent other users from accidentally changing
the quantities.
9 MACHINE
PROGRAMMING
All the operations described in chapter 9 must
be performed exclusively by the service provid-
er or a specialised technician, who shall organ-
ise all operating sequences and employ suitable means
to ensure strict compliance with the safety regulations
in force.
The specialist technician or the service provider can change some
of the machine operating parameters to suit the needs of the us-
ers.
9.1
Accessing the Programming Mode
Proceed as follows to access the programming page.
1
Turn off the machine using the power button.
2
Turn on the machine using the power button and...
while the machine checks the functions, press the buttons in the
following sequence.
Summary of Contents for auLika
