Saeco auLika, Operating Instructions Manual

Page: 16 / 62

• 10 •
Machine Use - User Manual
3.2 Warm-up and Rinsing
1 Upon start-up, the machine activates the warm-up phase.
Wait until it is completed.
HEATING UP…
Note: The bar is in progress to show that the ma-
chine is heating up the system.
2 Once the warm-up is complete, the machine performs a rinse
cycle of the internal circuits.
RINSING
ESC
STOP RINSING
Note: The bar is in progress to show that the ma-
chine is performing the rinse cycle of the system.
3 A small amount of water is dispensed. Wait for the cycle to
end.
Note: The cycle can be stopped by pressing the
"
" button (23).
4
Then, the machine is ready for use.
The logo is displayed indicating that the machine is ready for use.
Note: If the machine is being used for the fi rst
time or after a long period of inactivity, contact
the Service Provider to start it up.
3.3 Rinse/Self-Cleaning Cycle
This cycle enables rinsing the internal coff ee circuits with fresh
water. The cycle is carried out:
• At machine start-up (with cold boiler);
• After priming the circuit (with cold boiler);
• During the stand-by preparation phase (if at least one coff ee-
based product has been brewed);
• When turning off the machine, after pressing the " "
button (25) (if at least one coff ee-based product has been
brewed).
A small amount of water will be dispensed to rinse and heat all
the machine parts; in this phase this icon is displayed.
RINSING
ESC
STOP RINSING
Wait for the cycle to fi nish automatically. The dispensing process
can be stopped by pressing the "
" button (23).
3.4 Eco-friendly: Stand-by
The machine is designed for energy saving. The machine auto-
matically turns off after 30 minutes of inactivity.
Note:
- During the turning off phase, the machine performs a
rinse cycle, if a coff ee product has been brewed.
- Time can be programmed according to your needs
(contact the Service Provider).
To turn the machine on again, simply press either button on the
control panel (if the power button is set to "I"). In this case the
machine will go through the rinse cycle only if the boiler is cold.
3.5 Adjusting the Dispensing Spout
Most of the cups on the market can be used with this coff ee ma-
chine.
The height of the dispensing spout may be adjusted to better fi t the
dimensions of the cups that you wish to use.
Manually move the dispensing spout up or down to adjust its
height.