• 50 •
Machine Installation - Service Provider Manual
Note: Use a container of at least 1.5 litres capacity.
Press the "
" button (21).
STEP 1/2 DESCALING
DESCALING
PAUSE
If you do not have a container of this capacity,
pause the cycle by pressing the “
” button (22),
empty the container, place it back in the machine and re-
start the cycle by pressing the “
” button (21).
12
At this point, the machine will start dispensing the descaling
solution at intervals (the bar shows the cycle progress).
13
When the solution in the tank is fi nished, empty and rinse
the tank with fresh drinking water, as indicated by the machine.
RINSE TANK &
FILL WITH FRESH WATER
DESCALING
14
Rinse the water tank thoroughly and refi ll it with fresh drink-
ing water.
15
Insert the tank into the machine. Press the "
" button (21).
16
Empty the containers used to collect the liquid dispensed by
the machine.
EMPTY DRIP TRAY
DESCALING
17
Remove any liquids from the drip tray and insert the tray
back into the machine.
Press the "
" button (21).
INSERT THE
CAPPUCCINATORE WITH
ALL THE COMPONENTS
DESCALING
18
Check that the Cappuccinatore is placed in the machine.
Press the "
" button (21).
PLACE A CONTAINER
UNDER MILK AND HOT
WATER SPOUTS
DESCALING
19
Place a container under the hot water wand and a large con-
tainer under the Cappuccinatore.
Press the "
" button (21).
STEP 2/2 RINSING
DESCALING
PAUSE
20
The machine performs the rinse cycle.
Note: A default amount of water is needed for
the rinse phase. This allows an ideal rinse cycle
to be performed in order to ensure the best conditions
to brew products. A message to fi ll the water tank will be
displayed throughout the rinse cycle. This is normal and
part of the procedure.
Note: The rinse cycle can be paused by pressing
the "
" button (22). To resume the cycle, press
the "
" button
(21)
again. This allows you to empty the
container or to leave the machine unattended for a short
time.
