background image

23

English

Fig. 51

Fig. 52

7.3.2 Sugar 

supply

To refill the Instant version vending machine with sugar, 
fill the seventh instant product container as explained 
in section 7.3.1. For the espresso versions, perform the 
following operations:

Lift the cover of the sugar container located next to the stirrer 
dispenser and fill the container with sugar (Fig. 50).

Close the container cover.

7.3.3 

Coffee bean supply

Remove the container cover (Fig. 51).

Put coffee beans into the container (Fig. 52).

Replace the cover on the container.
For the double coffee grinder version, the operation 
described above must be repeated for both the containers 
using different coffee blends.

 Important

If the message “COFFEE NOT AVAILABLE” is displayed after 
the supply, the following operations should be carried out:

-   press  the 

P2

 key (Fig. 44) to enter the maintenance 

menu;

-  press the key “

e

” twice (Fig. 65) to eliminate the error (see 

sect. 8.3.3 Description of messages in the maintenance 
menu).

Fig. 47

Pour the instant product into the container (Fig. 49).

Close the container cover.

Fig. 46

Fig. 50

Fig. 49

Fig. 48

7.3.1 

Instant product supply

Open the cover of the container to be supplied (Fig. 48).

Summary of Contents for ATLANTE





























































Reviews: