background image

34

English

2. ENVISAGED MACHINE USE

The machine must be operated by a single operator only.

The authorized operator must have firstly read and fully un-

derstood all the instructions contained in the present booklet 

to ensure correct machine function.

This  machine  is  specifically  intended  for  the  professional 

preparation of espresso coffee using blended coffee, as well 

as the drawing and delivery of water and/or steam.

Its components are made of resilient non toxic materials, 

and they are easily accessible for cleaning or maintenance 

operations.

1  - INSTRUCTIONS BOOKLET 

CONSERVATION

The present instructions booklet has been prepared for the 

machine user, the owner and the installation technician and 

must be always available for reference purposes.

The manual is destined for the user, the maintenance tech-

nician and machine installation technician.

The purpose of the instructions booklet is to indicate the envi-

saged uses of the machine for which it has been designed, 

its technical features and in order to provide advice on cor-

rect use, cleaning and regulation. It also provides important 

maintenance information, and details on any residual risks, 

and all those operations which require particular care.

The present manual is to be considered as an integral part 

of the machine and must be CONSERVED FOR FUTURE 

REFERENCE until the final dismantling of the machine.

This instructions booklet must always be available for consul-

tation and must be kept in a protected and dry place.

In the event of loss or damage to the same, the user may 

ask the manufacturer or local dealer for a new manual, in-

dicating the machine model and serial number of the same 

as indicated on the identification plate.

The present manual reflects the state of the art, at the time of 

its preparation, the manufacturer however reserves the right 

to revise production and subsequent manuals without being 

obliged to update previous versions.

The manufacturer declines all responsibility in the event of 

:

-  the improper or incorrect use of the coffee machine
-  use that fails to comply with that specifically stated in the 

present booklet

-  serious lack of maintenance as envisaged or recommen-

ded

-  machine modifications or any non-authorized interven-

tion

-  use of either non-original or non-specific spares
-  total or partial failure to observe the instructions

This machine is intended for internal use only.

Ambient temperature for the correct operation of the machine 

5°C ÷ 25°C.

Summary of Contents for AROMA SM


































Reviews: