6
getting started
Charge Battery
1. The charger comes with adapter plugs suitable for all countries. Select correct plug. Position plug
in adapter at bottom of arrow indicators half way along adapter guides, then slide towards “push”
button and it will click and secure. To release plug, push button and slide out. Do not try to slide
in plug in front of metal contacts!
2. The initial charge should be a minimum of 12 hours. Subsequent re-charging will take 5-6 hours.
3. Battery indicator on LCD screen will flash whilst charging and stop flashing indicating 3 bars when
fully charged.
Position your SAD Solutions BLUElight Correctly
Q
You should sit in a comfortable chair in front of a table or desk.
Q
Place BLUElight at an angle of around 45° to the left or right of your
vision directly in front of you. (See diagram 1).
Q
Adjust stand so LED’s are directed to your eye level.
Q
BLUElight should be positioned NOT CLOSER than 50cm (20 inches), AND NOT FURTHER than 70cm
(30 inches) from your eyes.
Q
The environment where you are using BLUElight should be a well lit room – Natural daylight or
electric lighting if it is dark.
Q
You can carry on doing normal activities whilst using BLUElight ie. Reading, writing, using a
computer or watching TV.
Easy Operation
1. Press the round power button to turn on. LCD display will indicate 12:00.
2. To set the time press timer button using finger of one hand and hold down, whilst at the same
time press + or – button with finger of other hand to adjust time.
If you keep + or – button depressed, display will move very quickly!
You will not need to set time again even if unit is switched off. It will memorise the time set.
Manual Operation
Press light button and Blue LED’s will come on. Press + or – button to required level of intensity.
There are 4 setting which are indicated on the LCD display. Press light button to switch off LED’s
after you have ended your session. Switch power button OFF and LCD display will disappear. (If
you forget to turn power OFF, it will Auto switch off.
Timed Session
- Press timer button and timer symbol will appear on LCD screen with default time of 10 mins
underneath which will flash.
Diagram 1
SAD Solutions IB 16/9/10 12:31 Page 6
