Sacmi BTA 900, Instruction Manual, Page: 8 / 88

1 - 2
1
GENERAL INFORMATION
166.07
.A02
Revision 00 Date 18.10.1998
1.5 WARRANTY
SACMI shall be held responsible only for the machine as it was configured at the time of delivery.
Any operations that alter the configuration of the machine or operating cycle must be carried out by SACMI personnel
or duly authorized by SACMI’S Engineering Dept.
SACMI shall not be held responsible for damages deriving from the use of non-original spare parts.
E0004P
ATTENTION!
The machine operator or maintenance staff are not responsible for carrying out operations under warranty, special
maintenance and repairs. These operations are to be performed only by the manufacturers specially trained
technicians. For this reason, these types of operations are not dealt with in this manual.
1.6 ENCLOSURES
Information regarding the electric and electronic components of the machine are given in three handbooks provided
under separate cover and are entitled:
- USE OF THE MICROPROCESSOR CONTROL SYSTEM (Instructions B manual)
- LIST OF DEVICES, SETTING DATA AND NOTES ON USE
These handbooks are supplied with this manual.
1.7 LEGEND OF THE SAFETY SYMBOLS USED ON THE MACHINE AND/OR IN THE
MANUAL
WARNING SYMBOLS
E0004P
General hazard
E0002P
Danger of being burnt on hot surfaces (when plastic caps are handled)
E0003P
Danger of hands being crushed
E0007P
High tension, danger of being electrocuted