Sacmi BTA 900, Instruction Manual, Page: 28 / 88

2 - 18
2
MAIN FEATURES
166.07
.A02
Revision 00 Date 18.10.1998
2.3 TECHNICAL CHARACTERISTICS
2.3.1 SPECIFICATIONS
PLASTIC CAPS
Speed/1' (per 28 mm ROP) up to 1200
Diameter from 22 to 50 mm
Height from 12 to 60 mm
Power requirements (50 Hz) 6 kW
Absorbed power (50 Hz) 4.5 kW
Electric motor output (50 Hz) 3 kW
Switchboard cable 380 V - 50 Hz: four pole, copper (*) 4 x 4 mm
2
ALUMINUM CAPS
Speed/1' up to (per 28 mm ROP) 1750
Diameter from 22 to 40 mm
Height from 12 to 60 mm
Power requirements (50 Hz) 4 kW
Absorbed power (50 Hz) 3.5 kW
Electric motor output (50 Hz) 3 kW
Switchboard cable 380 V - 50 Hz: four pole, copper (*) 4 x 2.5 mm
2
Auxiliary voltage 110 VAG - 24 VDC
Air consumption (0.5 Mpa pressure) 1500 Nl dm
3
/1'
Air pressure, Cylinder (YV3) polypropylene caps 0,4 MPa
Air pressure, Cylinder (YV3) polyethylene or aluminium caps 0,2
÷
0,4 MPa
Air pressure, Cap ejection ( air jet M) 0.4 Mpa
Air pressure, Points of use 0.5 Mpa
Operating temperature and humidity 5 - 40
°
C
Humidity without condensate 30 - 95 %
Coolant (room temperature water) 5 l/1'
Machine weight see chapter 4 Installation
Various components
RST ground wire
4 mm
2
Compressed air hose, Inside diameter 13 mm
Cooling system hoses 12 mm
(*) When voltages and frequencies differ or material other than copper is used, the required adjustments have to be
made by a qualified electrician.
Further information regarding lubricants and greases is given in paragraph 2.3.6, LUBRICANT SPECIFICATIONS