Sacmi BTA 900, Instruction Manual, Page: 19 / 88

2 - 9
166.07
.A02
MAIN FEATURES
2
Revision 00 Date 18.10.1998
2.1.1.4 Tools
Fixed and movable tools need to be used to produce caps that meet the customer’s own individual requirements.
A data sheet is provided for all the tools, whether they be fixed or movable, which states the dimensions and
specifications of each individual part. This is done to ensure correct exchange with the spare parts.
2.1.1.5 Spindle
(see figure 2.1.1.5)
The movable tools which are needed to produce the caps are mounted on the spindles. The unit consists of a bush
(1) that houses the ball bearings that support the shaft (3). The pinion (4) is mounted on the rear of the shaft (3) and
is secured in place by the nuts (5). A seat which houses the movable tools is found at the front. The spindles are
mounted in the seats of the work drum (9) and are held in place by the wedges (7).