SAC T120, Use And Maintenance Instructions

Page: 60 / 80

T120C
54
8 Fixed guard and vise supporting pin
9 Fixed guard
10 Fixed guard locking screw
11 Reference ledges for piece length
12 Ledge locking knob
13 Splinter--proof device
14 Rule
15 Rule extension
The square enables straight tenoning or tenoning sloped from -60
°
to +60
°
.
Fig. 34:
To prevent splinters from forming while tenoning -- which is always transversal to the
wood fibers - it is necessary to use a splinter--proof insert installed on the rule; Fig. 34
shows the dimensions of the splinter--proof device according to the used rule profile;
it must be carried out in wood (e.g. spruce, beech, etc...)or other material not damaging
the tool if touching it.