T120C
28
Should the tool be damaged, balance it immediately.
4.5
INITIAL ADJUSTMENTS AND OUTFIT
4.5.1
Installation of the interchangeable spindle
To install the interchangeable spindle, operate as follows:
•
by the handwheel (1) lift the spindle completely and lock the spindle-holding
shaft rotating the knob (13) in the position A (Fig. 14);
PLQ
Fig. 14:
Shaft rotation lock/release
•
check if the splining cones and the threads of the spindle (19), of the spindle-
holding shaft (20) and of the ring nut (21) are perfectly free and bump-free;
•
tighten the locking ring nut (21) on the tool holding spindle, leaving about 3 mm
between ring nut and flange of theò spindle (Fig. 15);
Summary of Contents for T120
