SAC T120, Use And Maintenance Instructions

Page: 19 / 80

T120C
13
advisable to check the correct grounding of the machine; these steps must be
recalled to the specialized technician carrying out the electrical connection.
•
Before carrying out any maintenance on the machine, switch and cut it off from
power sources, set the main switch on zero and lock it.
•
Machining pieces that are too small or too big for the machine capacity may
cause a dangerous situation for the operator or the people near the machine;
always compare the sizes of the pieces being machined with the max. and min.
dimensions that the machine can work.
•
Do not remove or change the protection devices to change the operating ca-
pacity of the machine.
•
Be very careful when choosing and maintaining the tools.
•
Never use cracked, strained or excessively worn tools, as their utilization im-
pairs the machining quality and can involve risks for the people nearby the ma-
chine, as well as further increase the machine noise.
•
Always wear gloves when handling the tools; refer to the data in the handbook
for the knife locking and projecting, as well as for the best adjustment of the
knife locking screws.
•
A correct maintenance will ensure higher working safety as well as a constant
quality level of the machining.
•
The protection devices must be regularly checked for their operation, for
example before every working shift.
2.6 PROTECTION AND SAFETY DEVICES
The machine is equipped with the following protection and safety devices: