T120C
16
•
correct choice of the tool
•
correct choice of the feeding speed
•
maintenance on the tools and on the machine
•
correct use of the personal protection devices
2.8.2
Dust emission levels
The dust emission level in the place of work is [0.17](mg/m
3
of air).
2.8.3
Machine removal and demolition
For removing the machine, disconnect it from the power sources (e.g. electric system),
clean it carefully and cover the machining tables and the tool-holding shafts with anti-
rust agent. Do not store the machine in wet environment and protect it against weather
agents.
2.8.4
Emergencies
In case of flooding of the room where the machine is located, immediately cut the power
supply off. Before starting the work again, have the machine checked by a specialized
technician.
In case of fire, immediately cut the machine off and intervene using suitable fire extin-
guishers, aiming the jets at the flame bottom. Even if the machine is not apparently
damaged, before starting the work again, have the machine checked by a specialized
technician.
Summary of Contents for T120
