background image

 

30

 

Limited Warranty                                        

What your warranty covers:

 

 Defects in materials or workmanship 

 

For how long after your purchase:

 

 Two year from the date of purchase for labor and 

parts 

 The warranty period for rental units begins with the 

first rental or 45 days from date of shipment to the 
rental firm, whichever comes first. 

 
How you get service:

 

 Take your unit to any Authorized Service Center. To 

identify you’re nearest Authorized Service Center, ask 
your dealer, look in the Yellow Pages, or call 1-800-
336-1900. 

 Show the Authorized Service Center Representative 

your evidence of purchase date or first rental. 

 Pick up your unit when repairs are completed. 

 Proof of purchase in the form of a bill of sale or 

receipted invoice that is evidence that the product is 
within the warranty period must be presented to 
obtain warranty service. For rental firms, proof of 
first rental is also required.  

 

What your warranty does not cover: 

 Customer instruction. (Your Owner’s Manual 

describes how to install, adjust, and operate your 
unit. Any additional information should be obtained 
from your dealer.) 

 Installation and related adjustments. 

 Single reception problems not caused by your unit. 

 Damage from misuse or neglect. 

 Cleaning of audio heads. 

 Batteries. 

 A unit that has been modified or incorporated into 

other products or is used for institutional or other 
commercial purposes. 

 A unit purchased or serviced outside the U.S.A. 

 Acts of nature, such as but not limited to lightning 

damage. 

 

Product Registration: 

 Please complete and mail the Product Registration 

Card packed with your product. It will make it easier 
to  contact  you  should  it  ever  be  necessary.  The 
return of the card is not required for warranty 
coverage. 

 

Limitation of Warranty: 

 THE WARRANTY STATED ABOVE IS THE ONLY 

WARRANTY APPLICABLE TO THIS PRODUCT. 
ALL OTHER WARRANTIES, EXPRESS OR 
IMPLIED (INCLUDING ALL IMPLIED 
WARRANTIES OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE) ARE 
HEREBY DISCLAIMED. NO VERBAL OR 
WRITTEN INFORMATION GIVEN BY 
xxxxxxxxx. ITS AGENTS OR EMPLOYEES 
SHALL CREATE A GUARANTY OR IN ANY WAY 
INCREASE THE SCOPE OF THIS WARRANTY.  

 REPAIR OR REPLACEMENT AS PROVIDED 

UNDER THIS WARRANTY IS THE EXCLUSIVE 
REMEDY OF THE CONSUMER. Xxxxxxxxx 
SHALL NOT BE LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM 
THE USE OF THIS PRODUCT OR IMPLIED 
WARRANTY ON THIS PRODUCT. THIS 
DISCLAIMER OF WARRANTIES AND LIMITED 
WARRANTY ARE GOVERNED BY THE LAWS OF 
THE LAWS OF THE STATE OF INDIANA. 
EXCEPT TO THE EXTENT PROHIBITED BY 
APPLICABLE LAW, ANY IMPLIED WARRANTY 
OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE ON THIS PRODUCT IS 
LIMITED TO THE APPLICABLE WARRANTY 
PERIOD SET FORTH ABOVE. 

 
How State Law relates to warranty: 

 Some states do not allow the exclusion nor limitation 

of incidental or consequential damages, or limitations 
on how long an implied warranty lasts, so the above 
limitations or exclusions may not apply to you. 

 This warranty gives you specific legal rights, and you 

also may have other rights that vary from state to 
state. 

 

If you purchased your unit outside the United States: 

 This warranty does not apply. Contact your dealer for 

warranty information. 

 

Service calls which do not involve defective 

materials or workmanship are not covered by 
this warranty. Costs of such service calls are 
the sole responsibility of the purchaser. 

 

Summary of Contents for HTS-1500

































Reviews: