Center Hub
(H0135-S)
Linkage Rod M2.5x48mm
(H0137-S)
Plastic Ball Link
(H0066-S)
Main Blade Grip
(H0034-S)
Bearing
10x 19x5mm
(HC422-S)
Socket Head Cap
Screw M3x10mm
(HC056-S)
Uniball
M3x4 5H3
(H065-S)
Left Thread
Right Thread
Note
: Smaller ID
Blade Grip Arm
(H0136-S)
Uniball Radius Arm
Assembly
(H0205-S)
Washer
10x 16x0.2mm
(HC232-S)
Damper Derlin
(H0144-S)
Spindle
(H0079-S)
Uniball Radius Arm ... x 2
Assembly
Main Blade Grip Assembl
y ....x2
Note
: Larger ID
Button Head Cap Screw
M6x10mm
(HC122-S)
Washer
10x 16x1mm
(HC230-S)
Oring
(HA024)
Washer 6x 14 x1.5mm
(HC194-S)
Washer 10x 16x1mm
(HC230-S)
Thrust Bearing 10x 18x5.5mm
(HC438-S)
Socket Head Cap
Screw M2.5x18mm
(HC032-S)
Socket Head Cap
Screw M3x16mm
(HC068-S)
Washer
3x4x0.5mm
(HC176-S)
Swashplate Assemly
Center Hub Assembly
Radius Arm
(H0132-S)
Uniball Radius Arm
(H0205-S)
Flanged Bearing
3x 7x3mm
(HC402-S)
Flanged Bearing
2.5x 6x2.5mm
(HC400-S)
Spacer Arm
2.5x4x6.3mm
(H0253)
Spacer Arm 3x5x2.7mm
(H0134)
Main Blade Grip
Assembly
Bearing 10x 19x5mm
(HC422-S)
Approx. 75mm
Radius Arm ... x 2
Assembly
Uniball
M3x4 5H3
(H065-S)
Uniball
M3x4 5H18
(H063-S)
Swashplate
Assemly
(H023-S)
Uniball
M3x4 5H3
(H0065-S)
SETUP LINKAGE
Linkage Rod A Assembly . . . .x2
Radius Arm
Assembly
(H0132-S)
The HPS head should be assembled with one, 1mm
shim (
HC230
) and one, 0.2mm shim (
HC232
) on
each side. In this way, the preload is medium.
(see page 33 for some info about.)
After approximately
10/20
flights, please check the
preload, you can add one or two 0.2mm shims
(
HC232
) if the preload has changed.
(Initial length for the rods from the swash plate
to the Blade Grip.)
Damper Derlin
(H0144-S)
Oring
(HA024)
Copyright@2012 - SAB Heli Division - All rights reserved
Page 15
Head HPS
