SAB Heli Division Goblin 770 helicopter, Manual

Page: 44 / 47

Main Frame
[H0145-S]
Yellow Tail Boom
[H0147-S]
ESC Support
[H0153-S]
24T Pulley
[H0154-S]
- 1 x Secondary Shaft M3.
- 1 x Socket Head Cap Screw
M2.5x19mm.
- 1 x Socket Head Cap Screw
M3x20mm.
- 1 x Metric Hex Nylon Nut M2.5 H3.5.
- 1 x Metric Hex Nylon Nut M3 H4.
- 4 x Blade Spacer.
Blade Spacer
[H0158-S]
- 1 x CF ESC Support.
- 6 x Flat Head Cap Screws
M2.5x5mm.
- 1 x 24T Tail Pulley.
- 1 x Set Screws M4x4mm.
Secondary Shaft M3
[H0157-S]
Canopy Positioner
[H0159-S]
- 1 x CF Red Landing Gear Low Profile.
Red Landing Gear Low Profile
[H0162-S]
ESC Heatsink
[H0165-S]
- 1 x ESC Heatsink.
- 4 x Socket Head Cap Screws
M3x6mm.
- 4 x Set Screws M3x20mm.
- 4 x Metric Hex Nylon Nuts M3 H4.
- 12 x Washers 3.2x 6x.05mm.
- 3 x Set Screws M3x20mm.
- 2 x Washers 3.1x 12x1.8mm.
- 2 x Metric Hex Nylon Nuts M3 H4.
- 2 x Vite Nylon Esa M8x14mm.
- 2 x Metric Hex Nuts M8 H6.5.
- 2 x Double Sided Tapes.
- 1 x Yellow Tail Boom.
- 1 x Tail Boom Interface.
- 1 x Locking Interface.
- 2 x Tube Spacers.
- 2 x Locking Element Tails.
- 4 x Button Head Cap Screws M4x8mm.
Damper Derlin
[H0144-S]
-2 x Damper Derlin.
-2 x Washers 10x 16x1mm.
-4 x Washers 10x 16x0.2mm.
-4 x Orings 3050. -1 x CF Main Frame.
Yellow / Blue Canopy 770
[H0148-S]
- 1 x Yellow / Blue Canopy 770
- 1 x Canopy Mouse.
- 2 x Canopy Grommet.
Battery Tray
[H0149-S]
Stop Battery Tray
[H0150-S]
- 1 x Stop Battery Tray.
- 2 x Socket Head Cap
Screw M2.5x8mm.
Anti-rotation Guide
[H0152-S]
- 1 x Anti-rotation Guide.
- 1 x Socket Head Cap Screw M3x8mm.
- 1 x Finishing Washer M3.
- 1 x Battery Plate.
- 1 x Battery Protection.
- 2 x Cylinder M2.5.
- 2 x Flat Head Cap Screw M2.5x5mm
- 1 x Heat Shrink.
- 1 x 25T Tail Pulley.
- 1 x Set Screws M4x4mm.
25T Pulley
[H0155-S]
19T Pinion
[H0156-S]
- 1 x 19T Pinion.
- 1 x Socket Head Cap Screw M3x20mm.
- 1 x Metric Hex Nylon Nut M3H4.
- 1 x Spacer Arm 3x 5x2.7mm.
- 2 x Canopy Positioner.
- 2 x Socket Head Cap Screw
M3x10mm.
Red Tail Boom
[H0163-S]
- 3 x Set Screws M3x20mm.
- 2 x Washers 3.1x 12x1.8mm.
- 2 x Metric Hex Nylon Nuts M3 H4.
- 2 x Vite Nylon Esa M8x14mm.
- 2 x Metric Hex Nuts M8 H6.5.
- 2 x Double Sided Tapes.
- 1 x Red Tail Boom.
- 1 x Tail Boom Interface.
- 1 x Locking Interface.
- 2 x Tube Spacers.
- 2 x Locking Element Tails.
- 4 x Button Head Cap Screws M4x8mm.
- 1 x Red Canopy 770
- 1 x Canopy Mouse.
- 2 x Canopy Grommet.
Red Canopy 770
[H0164-S]
Copyright@2012 - SAB Heli Division - All rights reserved Page 42
Chapter 18, Spare Parts