Saadat Dena 650, User Manual

Page: 57 / 101

Chapter 6: ECG analysis and measurement
46
NOTE

The measurement table is printed at the end of recording, only in Automatic and Sync recording.

The units for time parameters and amplitude parameters, are millisecond [ms] and microvolt
[µV], respectively.

Glasgow Analysis Software is merely a diagnostic aid software, and for treatment measures, it
is essential that the specialist doctor make a definite statement about the patient's condition.

The specific code of the expressions is reported according to the type of signal and the presence
of cardiac abnormalities, and in some cases, not all of the codes mentioned in the interpretation
results may be present. For example, if STEMI is detected, the corresponding expression is
reported to the user with the code {H}, while for a normal signal, none of the expressions begin
with the specific code {H}.

For more information, refer to Appendix 4 The GLASGOW program.