Saadat Dena 650, User Manual

Page: 28 / 101

Chapter 2: System settings
17
Print Mode Menu
Select Print Mode from the Main Menu to access the below menu:
The following items can be set through this menu:

Print Mode:
available options are Auto, Manual and Rhythm.
Auto: Automatic modes of recording are 1+1, 3, 3+1 and 6.
Manual: Manual modes of recording are 1+1, 3, 3+1 and 6.
Rhythm: Available options for duration of Rhythm recording are 30, 60, 90, 120, 150 and 180.

Rec state:
available options for this item are Real time and Sync.
In the Sync mode, the signals of different leads are recorded simultaneously i.e. recording of all
leads starts at the same time.
In the Real time mode, at the moment of recording each signal, the signal received from the
patient is used at the same time.

Rhythm Lead
if you select Auto 1+1, Auto 3+1, Manual 1+1, Manual 3+1 or Rhythm mode,
Rhythm Lead will be enabled and selectable.
The Rhythm lead can be one of I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5 and V6
leads

Header:
Select ON to print the signal and recording information on header of the recorder
paper. Select OFF to print only signal on the paper (without any information).
NOTE

For more information about Recording types, see the chapter Recording Operation.

Sync recording can be performed only in Automatic modes.
Figure 2-2 Print mode menu