Saab 2004 9-5 Owner'S Manual Download Page 99

Page: 99 / 288

Saab 9-5 Audio System

If for some reason the CD selected by the
preset button cannot be played, playback of
the current CD will continue.

Track search (2)

Press

repeatedly to move

to preceding or following tracks. Pressing

once will restart playback from the

beginning of the current track. Thus, to play
the preceding track, press

twice.

Rapid play

When

is pressed and

held, rapid play will be initiated, with the time
and track showing on the display, e.g.:

If the button is depressed for more than
5 seconds, the rapid play will be even faster.
Rapid play stops when the button is
released.

Fast track search

Press SEEK (mid-segment) once to switch
between the CD-PLAY and CD-TRACK
modes.

The CD-PLAY and CD-TRACK modes
change the function of

and

The selected mode will also be active the
next time the system is switched on.

Choose the mode that you find most
convenient:

CD PLAY

Pressing and holding

briefly

starts Rapid play

CD TRACK

Pressing and holding

briefly

starts Fast track search

IB1846

Summary of Contents for 2004 9-5

































































































































































































































































































Search results

Summary of Contents for 2004 9-5

Reviews:

Related manuals for 2004 9-5

Brands by name

Popular brands

Saab 2004 9-5, Owner'S Manual

Search results

Summary of Contents for 2004 9-5

Reviews:

Related manuals for 2004 9-5

Brands by name

Popular brands