11
SBK-BYOS2 INSTALL | 0419
Copyright ® 2019 S.R.Smith, LLC All rights reserved. |
srsmith.com
I N S TA L L AT I O N I N S T R U C T I O N S
B YO S 2 S L I D E
STEP 4: 20˚ ANCHOR INFORMATION
The following information is for the BYOS 2 20˚ anchor and should be reviewed before proceeding onto the next step.
Our 20˚ anchor is designed to allow easier use with concrete tube forms.
The length of our BYOS 2 flume anchors allow room for concrete chutes when using concrete tube forms in a
BYOS 2 installation. This anchor design will provide more flexibility in installation options and make your BYOS 2
installations even easier. (Fig. 14)
24”
Concrete
Embedment
Depth 24”
FIG. 14
STEP 5: MOVE THE SLIDE
Once the entire slide is assembled and resting on the anchor supports in its correct horizontal position on the
pathway, use spray paint to carefully mark the location of the anchor supports. Next, with sufficient manpower, gently
move the assembled slide (if possible) approximately 3 feet to one side.
