20
2 Installation — LEICHTmount 2.1 E/W
© S:FLEX GmbH 02/2017/ Subject to technical modifications
S:FLEX GmbH
•
Reinbeker Weg 9 21029 Hamburg Tel. +49-(0)40-68893170
•
Sasbacher Straße 7 79111 Freiburg Tel. +49-(0)761-888 56 08-0
[email protected] www.sflex.com
Additional end clamps
In order to achieve an optimally integrated system and keep the ballast requirements as low as possible, it is necessary
to mount two end clamps on the long side of the module in addition to the Top Parts or Bottom Parts.
2.5 Completing the system with additional end clamps
Attach the additional end clamp at the top of each
Top Parts and Bottom Parts. An additional clamp is
not necessary for the Front Part at the start and end
of each row.
