background image

Version 2021:1

  

|

  

RESCUE Intellitech reserves the right to make technical changes to the product.

  

|

  

No responsibility will be

accepted for any printing errors.

We take decontamination seriously. You should too!

Research and statistics all tell us the same story. Today’s firefighters are being exposed 
to dangerous toxic chemicals that cause long term health problems, and even deaths. 
Unfortunately, fires will keep occurring and firefighters will always have to be ready when 
that happens. Their job is to protect us, and we have made it our mission to help protect 
them. Reducing the amount of toxic chemicals and carcinogens that firefighters are exposed 
to on a daily basis is one of several critical aspects of ensuring a safe work environment and 
firefighters’ long-term health. With the Solo Rescue® Decon Washer, your fire department 
can reduce toxic chemicals and carcinogens in a quick, easy and safe way. By adding our 
DeconFilter™ Pro S to that process, you will also reduce the number of toxins you flush down 
the drain and prevent them from spreading further.

SAFETY

 

EQUIPMENT

 

AUSTRALIA

35/1

 

Jubilee

 

Avenue

 

WARRIEWOOD

 

2102

 

Private

 

Bag

 

1001

 

MONA

 

VALE

 

2103

Tel:

 

02

 

9910

 

7500

 

Free

 

Call:

 

1800

 

655

 

129

 

Fax:

 

02

 

9979

 

5364

E-mail: [email protected]

Website: www.sea.com.au

Summary of Contents for RESCUE Intellitech DeconFilter Pro S


















Reviews: