background image

 5

2 General Description and Safety

without limitation, the implied warranties of merchantability, title and/or fitness for a particular purpose. 

The express limited warranty above is ONLY valid if the 

DeconFilter™

 Pro S is installed by an authorized 

representative of RESCUE Intellitech. If a 

DeconFilter™

 Pro S would be installed, repaired or otherwise 

modified by someone other than an authorized representative of RESCUE Intellitech, the limited warranty shall 

immediately lapse.

2.4 Limitation of Liability

In no event shall RESCUE Intellitech, or any of its representatives or affiliates, whether in contract, tort or 

otherwise, be responsible or liable for any consequential, indirect, incidental, special, exemplary, or punitive 

damages arising out of or in connection with the delivery of any 

DeconFilter™

 Pro S products, or the use 

thereof, regardless of (a) whether such damages were foreseeable, or (b) whether or not RESCUE Intellitech 

was advised of the possibility of such damages.

Except for obligations to make payment under this agreement, each party’s aggregate liability arising out of or 

related to this agreement, whether arising out of or related to breach of contract, tort (including negligence) or 

otherwise, shall not exceed the total amount paid under this agreement during the 12-month period preceding 

the event giving rise to the claim. 

The limitations of liability set out herein shall not apply with respect to damages arising out of grossly negligent 

acts or omissions or wilful misconduct or misuse. 

3 Technical data

Dimensions H x W x D

1800 x 300 x 750 mm (71’’ x 12’ ’x 30’’)

Weight (empty)

70 kg (154 lbs)

Filer tank volume

130 liters (34 gallons)

Power supply

EU: 5 m (16 ft) cable with Schuko plug included. Other regions: Please contact your local dealer

Rated Voltage

220–240 VAC single phase

Fuse

10 A

Frequency

50 Hz

Rated Power

0,55 kW (0.7 hp)

Drain hose connection

19 mm (3/4”), 6m (19 ft) hose included

Minimum drain capacity min.

35 l/min (9 gallons/min)

Drain outlet height on wall max.

1,5 m (5 ft)

Filtration technology

Multi stage custom filtration including lint filter, particle filters and active carbon filter

Pump

Stainless steel, high temp, handle solids up to 10 mm (0.4’’).

Capacity

Up to 3 Solo Rescue Decon Washers

Options

Wall mount accessory

Filter change recommendation

Every three months, or according to pressure indicator. More often depending on application.

Summary of Contents for RESCUE Intellitech DeconFilter Pro S


















Reviews: