16
6 Service & Maintenence
6.5 Cleaning pump intake (every 12 months)
1. Pull off the intake cage from the housing and
remove the impeller cover by loosening all six
Phillips head screws.
2. Clean and rinse the intake cage, impeller and
the impeller cover with clean water (Fig. 26 & 27).
CAUTION
: Do not rest the pump on the impeller.
3. Reassemble the impeller cover and push the
intake cage back in place.
4. Install pump and lint filter by reversing the
disassembly steps.
NOTE
: There are no parts inside the pump housing
which require additional maintenance.
Figure 26
Figure 27
