6K V1.02 03-16-91
82
AUTOPATCH
POUND (#) DOWN ON/OFF
Command Form:
(PW) 63 05 (0=off/1=on)*
Description:
Some customers want the ability to dump (hang up) the autopatch by
entering just the
#
key. If this feature is turned on, the autopatch can be
dumped with the # key as well as the other methods (control command
or macro). If this feature is turned off, the autopatch can be dumped
only with the control command (or a macro containing the control
command).
Note that the # key still retains its other meaning (clear the command buffer)
whether this feature is on or off. That is, if the # key is pressed when a
partial command is in the command buffer, the controller will clear the
command buffer but will not dump any autopatch or reverse patch in
progress at that time. Only when this command is on, and the command
buffer is empty, will the # key dump an autopatch or reverse autopatch.
Since the # key needs to be pressed for only a short time, it is easy for
troublemakers to dump a call in progress. That is the reason for allowing the
pound down feature to be turned on and off.
Acknowledgement:
OK
Errors:
? ERR 1
wrong number of digits entered
? ERR 2
illegal digit entered
Default Condition:
off
Examples:
To turn the pound down feature on, enter the following command:
(PW) 63 05 1 *
