6K V1.02 03-16-91
76
AUTOPATCH
DIALING MODE
Command Form:
(PW) 61 (1=10 pps/2=20 pps/3=DTMF) *
Description:
This command selects the autopatch dialing default mode (the mode can be
changed during dialing with embedded C and D characters). Ten PPS
(pulses per second) rotary is the standard method. Twenty PPS works on
some exchanges. DTMF (dual tone multi-frequency or Touch Tone) will
work if you have the service in your area and have a Touch Tone line
connected to the controller.
Acknowledgement:
OK
Errors:
? ERR 1
wrong number of digits entered
? ERR 2
illegal digit entered
Default Condition:
10 PPS rotary
Examples:
To change the dialing mode to DTMF, enter the following:
(PW) 61 3 *
To change the dialing mode to 20 PPS, enter the following:
(PW) 61 2 *
To change the dialing mode to 10 PPS, enter the following:
(PW) 61 1 *
