6K V1.02 03-16-91
100
CW
SPEED SELECT
Command Form:
Speed Select (Normal)
(PW) 12 (0-9) *
Speed Select (Slow)
(PW) 13 (0-9) *
Description:
Speed Select (Normal) changes the speed at which CW messages are
normally sent. Speed Select (Slow) changes the speed at which CW
messages are sent when preceded by the Slow Next Message command.
A single digit programs the desired speed as indicated in the table below:
0 = 5 WPM
5 = 17 WPM
1 = 7 WPM
6 = 20 WPM
2 = 10 WPM
7 = 24 WPM
3 = 13 WPM
8 = 30 WPM
4 = 15 WPM
9 = 40 WPM
Acknowledgement:
OK
Errors:
? ERR 1
wrong number of digits entered
? ERR 2
illegal digit entered
Default Condition:
Normal = 20 WPM
Slow = 15 WPM
Examples:
To change the normal CW sending speed to 17 WPM, enter:
(PW) 12 5 *
To change the slow CW sending speed to 10 WPM, enter:
(PW) 13 2 *
Note: There are two ways to change the speed of a CW message. One
way is to use the command above; this is usually done upon installation.
The other method is to insert a speed change character into the message.
This is a temporary method, since the speed returns to normal after the
message buffer empties.