6K V1.02 03-16-91
75
AUTOPATCH
CALL TYPES
Command Form:
(PW) 60 (list0-7/none=OFF) *
Description:
Selects the types of calls permitted by the autopatch. Enter up to 8 digits
from the table below:
(none) no calls permitted (autopatch off)
0
ACCEPTED calls
1
0 (Operator)
2
XXX-XXXX (local calls)
3
0-XXX-XXXX (operator-assisted 7-digit calls)
4
1-XXX-XXXX (direct dial 7-digit calls)
5
0-(XXX)-XXX-XXXX (operator-assisted 10-digit calls)
6
1-(XXX)-XXX-XXXX (direct dial 10-digit calls)
7
1-(800)-XXX-XXXX (toll free calls)
(Entering any digit 0-7 will permit Accepted numbers)
NOTE: Entering this command will dump any autopatch call in progress, and
clear the re-dialer memory.
Acknowledgement:
OK
Errors:
? ERR 1
wrong number of digits entered
? ERR 2
illegal digit entered
Default Condition:
Autopatch Off
Examples:
To turn the autopatch off, enter the following command:
(PW) 60 *
To permit only Accepted numbers, operator calls, and local calls, enter the
following command:
(PW) 60 0 1 2 *
or
(PW) 60 1 2 *
Note: The 0 (zero) data digit is not needed, as entering any digit 0-7 will
permit Accepted numbers.
